From a historical perspective however, it's perhaps easier to understand why this was done. What is perhaps more open to question is why Apple didn't take the opportunity with System 7 or later to separate the tasks and provide a simpler, clearer interface.
Apple Wiki Explore. Adespoton Davigs72 Pippinitis. Pages Keynote Numbers. Andrea Jung Ronald D. Sugar Apple Board of Directors. Mac OS development.
Explore Wikis Community Central. To navigate the list of open apps, press the Down Arrow or Up Arrow key, or flick down or up on the trackpad. If you used the VoiceOver command to open the chooser, pressing the Space bar opens a submenu that lists all open windows, dialogs, or alerts for the app. Navigate a submenu in the same way you did the list of apps. To exit the Application Chooser without making a selection, press the Escape key or Fn-Tab, or scrub back and forth with two fingers on the trackpad.
Select a Binding position from Left , Top , or Right. Click Duplex Settings to open the Duplex Settings dialog box. Specify the Binding Margin for the front and back sides of the paper.
Select whether the front or back side of the paper is to be printed as the Start Page. Click OK to accept the settings and return to the Layout dialog box. Follow the steps below to avoid memory errors and continue printing. Note: Print quality will decrease when you use this function.
Click the Extended Settings icon on the Basic Settings dialog box. Select the Avoid Insufficient Memory Error check box. See the appropriate sections below for installation instructions according to the operating system that you are using.
Before installing the printer driver, make sure that your hard disk has at least 3. Easy Install installs all the necessary files. Normally, you should use the Easy Install method since this ensures that all necessary files are copied and that your computer is set up to give you the full benefit.
Custom Install installs only the files that you specify. You might want to use the Custom Install method if you are low on hard disk space and want to install only those files that are absolutely required. However, if you have enough free disk space, it is recommended that you choose the Easy Install method. Easy Install If your Macintosh starts up any applications automatically such as a virus checker when the computer is turned on, quit the applications before running the Installer.
Turn on your Macintosh if it is not already on. Double-click AdobePS 8. Follow the on-screen instructions until the install screen is displayed. Select Easy Install , and then click Install. When installation is done, click Restart to restart your computer. This completes the installation of the printer driver. You now need to select the printer driver as described in the next section. If you are connecting two or more EPSON printers of the same model using AppleTalk, and you want to rename the printer, see the Administrator's Guide that shipped with the printer.
Custom Install EPL only If your Macintosh starts up any applications automatically such as a virus checker when the computer is turned on, quit the applications before running the Installer. To perform a Custom Install, in which you specify which files to install, follow steps 1 to 5 of the Easy Install method see previous section , and then do the following:. Select Custom Install.
Select the item s that you want to install. Note: If you want information on a particular item, click the icon to the right of that item. Click Install. When installation is done, click Quit.
Restart your computer. This completes the installation of the printer software. If you are not able to print after a Custom Install, perform the Easy Install installation to copy all necessary files to your computer.
If you are connecting two or more printers of the same model using AppleTalk, and you want to rename the printer, see the Administrator's Guide that shipped with the printer. Selecting the PostScript printer driver If the printer is fitted with an optional network card, select it from the Chooser as described below.
Click the AdobePS icon to select it. The name of your printer appears in the Select a PostScript Printer box. Note: By default, the six-digit MAC address is displayed after the printer name. Refer to your network card manual for details.
The Create button appears. Click Create. A message will appear marking the completion of the setup. The Chooser dialog box will be displayed again.
The Create button changes into the Setup button. To confirm that the setup completed successfully, click Setup in the Chooser dialog box, and then click Printer Info and Configure to check the settings. Return to the dialog box shown above. Click Select PPD. The PPD selection dialog box will be displayed. If you need to cancel the installation of the PPD you selected, click Cancel. To try to setup the printer again, repeat step 5 above.
PostScript printer driver settings The printer driver enables you to change the settings for your print job. The printer driver settings can be accessed through the Page Setup and Print dialog boxes of the application that you are printing from. The various settings are grouped under the Page Setup and Print dialog boxes in the following manner:.
Page Setup dialog box: Settings that affect the attributes of the page to be printed, such as the paper size, orientation, and margins are available here. Print dialog box: All other print settings, such as the paper source, resolution, and other PostScript settings are available here.
The actual settings that are available might vary, depending on your application. Page Setup dialog box When you select Page Setup in the File menu of your application, the dialog box shown below appears. The dialog box you see might be slightly different, depending on your application. Cancel Click this button to exit the dialog box without saving any changes you made. Page Attributes Paper Select the desired paper size from the Paper pop-up menu.
This setting must match the size of the paper loaded in the printer. The paper sizes that are available will differ according to the printer. The default setting is either A4 or Letter , depending on your country of purchase. Orientation Specify whether the page is to be printed in the portrait vertical or landscape horizontal orientation. Scale This setting enables you to shrink or enlarge the image to print. However, if you can shrink or enlarge the image to print in the application that you are printing from, do so in the application and not through the printer driver.
Booklet Select this check box to print out two document pages on a single sheet of paper. When the sheet is folded in half, it will form a booklet. You can set the page orientation for either left-right or top-bottom folds.
Watermark None This radio button is selected by default, and indicates that your print job will be printed without any watermark. First Select this radio button if you want the selected watermark to be printed only on the first page of your document. All Select this radio button if you want the selected watermark to be printed on all the pages of your document. Foreground Select this check box if you want the selected watermark to be printed in the foreground, i. Save With Document Select this check box if you want to save the watermark with the document for future printing.
Edit Click this button to modify the contents of the selected watermark. Only watermarks in the TEXT format can be modified. This button is available only when the TEXT radio button is selected.
Flip Vertical Select this check box to flip the printed image vertically on the page. Invert Image Select this check box to invert the image or text on the page so that black areas of the page become white and white areas become black.
0コメント